| |
|||
| The Gem and Jewelry World's foremost Resource on The Internet. |
| [Orchid] Bead Blaster and Humidity | ||
|
[Thread Prev]
[Message Prev]
[Date Index]
[Thread Index]
[Message Next]
[Thread Next]
From: Kay Date: Wed Aug 31 22:37:20 2005 |
||
========[ Invite a Friend - http://www.ganoksin.com/invite.htm ]======== Recently I acquired a table top Bead Blaster - pencil style - and have tried to use aluminum oxide. I am faced with an unexpected problem - I have the bead blaster in my garage and I live in Florida - can you spell humidity? It apparently causes the aluminum oxide to clump together so it won't flow continuously. Rio G suggest moving the bead blaster inside in the air conditioning, but needless to say, there is no space inside for this, so I have to find another solution. I am considering placing a desiccant (small packet) inside the bead blaster in a corner or where ever I can put it in the hopes that this will help remove the humidity from the media. Does anyone have input on this - or if you have used a bead blaster at all, would you share any tips you may have on its use? I have ordered the glass beads to try in the hopes that perhaps they won't be quite so affected by the humidity, though I fear that won't make much difference. Any and all comments, tips, advice, etc. are welcomed. This is indeed frustrating. It does work but only in spurts - each time the tube fills with the media, I can blast a tiny bit, then it's whack, shake, stir, scream, whatever it takes to get that tube filled the next time so I can blast again. Took over an hour to bead blast a 1/2 inch by 1 inch piece of sterling (scrap). Needless to say, my patience is beginning to wear thin. Hope someone has some wonderful idea. Thanks in advance. You may also contact me at my person email: bericho1 AT comcast.net. Kay, in Sarasota and very grateful that Katrina bypassed us and sad for those not so lucky. ____________________________________________________________________ T h e O r c h i d L i s t Open Electronic Forum for Jewelry Manufacturing Methods and Procedures ____________________________________________________________________ Orchid FAQ: ~ http://www.ganoksin.com/orchid/faq.htm Orchid Archives: ~ http://www.ganoksin.com/orchid/archive Orchid Galleries: ~ http://www.ganoksin.com/orchid/gallery.htm Invite a Friend: ~ http://www.ganoksin.com/invite.htm ____________________________________________________________________ Tips From The Jeweler's Bench - Article Archive ~ http://www.ganoksin.com/borisat/tip_sear.htm The Jeweler's Selected Bibliography List ~ http://www.ganoksin.com/jewelry-books Buy Orchid Jewelry: ~ http://www.ganoksin.com/shop ____________________________________________________________________ -Unsubscribe: -Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank ____________________________________________________________________ |
||
| Navigate: | ||
|
||
| Orchid Resources: | ||
|
Join & Post Invite a friend to join Orchid F.A.Q Galleries BenchExchange Orchid Message Archives [Subject Index] [Date Index] Ganoksin now offers a number of ways for you to stay on top of the latest from Orchid!
|
||
© Copyright 1996 - 2008, The Ganoksin
Project