[Jewelry making - Article 00867] - Re: [Orchid] I'm buying a kiln for enameling

[Tammy Kirks]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Jenny:

    If you search the archives, I believe there have been several
    discussions on kilns in the past so you might also check there for
    advice. 

    I wanted a Vcella, but couldn't afford it! I bought a Paragon with a
    digital pyrometer and have been very pleased. I can't remember the
    model number, but it's an 8 1/2x8 1/2x9 kiln. It does have a
    peephole, but I'm old-fashioned and like opening the door because I
    can see the reflection on the surface of my piece better. 

    Good luck! Feel free to contact me offline if you want to discuss
    kilns or enameling in detail. 

Tammy Kirks
Red Bee Designs
Www.redbeedesigns.com
tammykirks AT mac.com

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________