[Jewelry making - Article 00353] - Re: [Orchid] A different Argentium problem

[Cynthia Eid]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

>     Your post implies that you have used binding wire successfully. I
>     was told it would also cause cracking. What is your experience with
>     binding wire? Have you used it successfully with all grades of
>     Argentium solder, or just the Argentium Easy?? 

Hi Debby!

    I have not had any problem using binding wire with Argentium
    Sterling Silver. I have not used all the Argentium solders with it,
    since they are new, but I have used regular medium silver solder,
    which melts at a similar temperature to Argentium Hard. 

Best wishes,
Cindy

Cynthia Eid
http://www.cynthiaeid.com

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________