[Jewelry making - Article 00230] - Re: [Orchid] Adjusting Regulators

[Mark Shneyer]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    A two stage regulator will smooth out the pressure on the line side
    of the torch. Many single stage Oxy regulators will tend to surge
    when lit and some will pulse while lit because the bladder is meant
    to handle heavier pressures than a jewelers torch needs which is
    usually between 6 & 15 lbs.

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________