[Jewelry making - Article 00178] - Re: [Orchid] A different Argentium problem

[Trevor F]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

>     The availability of the Argentium solder is still pretty new - does
>     anybody have experience with using it yet? Or if you've used
>     sterling solders, what differences, advantages, or disadvantages
>     have you noted? 

    I've tested and used all three grades.  See the following entries at
    the blog: 

    "Testing the new solders" at
    http://touchmetal.com/blog/2005/07/testing-new-solders.html

    "More tests on the new solders" at
    http://touchmetal.com/blog/2005/07/more-tests-on-new-solders.html

    "Final comments on the new solders" at
    http://touchmetal.com/blog/2005/07/final-comments-on-new-solders.html

Cheers,
Trevor F.
in The City of Light
www.touchmetal.com

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________