[Jewelry making - Article 00139] - Re: [Orchid] A different Argentium problem

[Eva Martin]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

>     I've used Hoover & Strong's medium silver solder with Argentium
>     quite happily on a number of pieces. I think the flow point of your
>     Medium solder should be ok - the new Argentium silver Hard solder
>     from Rio has a flow point of 1355F. 

    Sorry Debbie - I meant to say the new Argentium silver Hard solder
    from STULLER not Rio. Trevor F. at Touchmetal.com has a great account
    of his experiences with these new solders here:

    http://touchmetal.com/blog/2005/07/final-comments-on-new-solders.html

Sorry to confuse.

Eva
Eva Martin
Hampshire, UK.
www.evamartin.com

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________