The Gem and Jewelry World's foremost Resource on The Internet.
[Orchid] Making Bad molds  
  [Thread Prev] [Message Prev]      [Date Index]   [Thread Index]      [Message Next] [Thread Next]
From: Richard Olson
Date: Fri Jul 22 20:53:57 2005
 
     
========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    I'm sorry to put a negative spin on the "Making good molds" thread
    [ http://www.ganoksin.com/orchid/archive/200507/msg00622.htm ], but
    I've been making molds for over 30 years and have made thousands of
    them. 

    My intent is to save anyone some grief for trying a new product. I
    made the mistake of ordering some "Choice" brand mold rubber from a
    very "Grande" company that most of us deal with. 

    When it arrived, I was surprised that it was made in Mexico. Not that
    this would make any difference, but my first thought was, I hope this
    is quality stuff. 

    This is the worse rubber I have ever used. Not that the final molds
    are that bad, but the molds are so sticky when they come out of the
    vulcanizer, you have rubber sticking everywhere. I use the same tongs
    to remove the mold frames from the vulcanizer as I do to take hot
    flasks out of the oven. The rubber sticking to the tongs against the
    flasks stink up the whole shop. My bench pin where I cut the molds is
    sticky too. 

    This is not an issue of vulcanizer temperature. This is just bad
    rubber. Has anyone else experienced this?

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________

  Click to Visit  
     
  Navigate:  
   
  Orchid Resources:  
   Join & Post
 Invite a friend to join Orchid
 F.A.Q
 Galleries
 BenchExchange
 Orchid Blogs
 Orchid Message Archives [Subject Index] [Date Index]

Ganoksin now offers a number of ways for you to stay on top of the latest from Orchid!

  1. My Yahoo - Do you have a My Yahoo page? If so, you can easily read the latest Orchid posts on your personalized page by adding this feed:Add Orchid to My Yahoo!
  2. Add Orchid to myGoogle Add to my Google
  3. Read Orchid with NewsGator and Microsoft Outlook Add Orchid to Your  NewsGator
Support Orchid! - If you believe in what we're doing, you can help!

 
     
     

© Copyright 1996 - 2009, The Ganoksin Project