[Jewelry making - Article 00830] - Re: [Orchid] English Wheels

[detyr]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Thank you for the link to the Rodding Roundtable. They have good
    pictures. I have also sent away for the "mini english wheel" plans
    from the Poor Man's Publications. 

    http://metalwebnews.com/poorman/poorman-metal.html 

    It little picture there shows a crank at the back of the upper arm
    which I suppose might be used to move the metal through the wheel.
    There is no indication of the size of the machine you would get
    using those plans but perhaps you can make any size that you want. 

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________