[Jewelry making - Article 00809] - Re: [Orchid] Sanding disks

[Gerry Lewy]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    The sanding disks that I constantly use are made in the Dearborn,
    Michigan, namely "Moore's", Abrasive discs. These are in the
    diameter of 7/8 inch and are called ADALOX-Fine, or Medium, or
    Coarse (grit). These can be used up to 30,000 RPM..These all have a
    Brass Center..need I say more? If you buy cheaper, you get what you
    pay for..right? ...Gerry!

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________