[Jewelry making - Article 00590] - Re: [Orchid] Unvented basement workspace and health

[Karen Bahr]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Zen and Group

    My husband installed a simple bathroom fan horizontally into the
    bench between my soldering area and pickle pot. He then vented this
    out the wall behind my bench as I too am in the basement of a
    bi-level house. This fan takes the fumes right off the bench before
    they come past my face and whisk them outside. This fan cost about
    $40CAD can exchange at the rate of 80 cubic feet per minute. You can
    get larger fans that are the same dimensions. 

    He also set up my gases outside and piped them in so if the tanks
    leak they are quickly dissipated outside. I only had trouble with one
    faulty Acetylene tank which was replaced.

Karen Bahr
Karen's Artworx

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________