[Jewelry making - Article 00454] - Re: [Orchid] Jump rings

[Starstones22]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Before tumbling jump rings I thread them on a loop of sterling
    silver wire.  24 gage works just fine.  Or you can purchase some
    large safety  pins.  Don't pack the rings together too tightly. Allow
    enough room  for them to move. They won't get tangled and you won't
    have to dig through the  steel shot to find them. 

Batya

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________