[Jewelry making - Article 00418] - Re: [Orchid] Wax lathes

[Jim Zimmerman]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

>     Can you do wax model rings other than just a simple band? Do you
>     use a solid wax cylinder to start? What sort of measuring tools do
>     you use for the I.D., O.D.? Thanks for whatever information you
>     care to share. Ed 

    Hi Ed, That's mostly what I use it for is nonsymmetrical shapes. Yes,
    I start from solid ring toobs.I use digital calipers for O.D. and
    I.D., I use a combination of digital caliper and a T gauge. The T
    gauge is a tool with two spring driven piston and lock in the
    handle. You compress the piston and release them inside the wax and
    then you relock the gauge You measure the new distance with your
    calipers and that's your inside diameter. They are available at
    Industrial supply houses. 

Jim Zimmerman
Alpine Custom Jewellers & Repair
http://www.handengravingcanada.com
Jim Zimmerman
jimzim AT hay.net

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________