[Jewelry making - Article 00354] - Re: [Orchid] Recommendations on a scroll saw?

[Jewelryartschool]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Lee Marshall designed the new power saw to maximize the cutting
    length  available on jewelers saw blades. I've run mine with blades
    from #1 to  5/0. This afternoon I intend to try it with 8/0 & 10/0
    blades. 

    There is an old posting in the forum at the Bonny Doon website that 
    illustrates the prototype for those of you who have not seen one at
    Tucson or  SNAG. Look for the Feb. 20th, '05 posting by Lee
    Marshall. 

    And no, we don't think we are related, though we did have a long 
    conversation about it at lunch yesterday... there is also a Brian
    Marshall in  England whom we both know... 

Brian P.  Marshall
Stockton Jewelry Arts School
Stockton, CA  USA
209-477-0550
instructor AT jewelryartschool.com
jewelryartschool AT aol.com

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________