[Jewelry making - Article 00317] - Re: [Orchid] Recommendations on a scroll saw?

[silvermouse]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    I've been using a Dremel variable speed scroll saw with some success,
    but hand sawing is just as quick and more accurate. The main reason
    is that the blade stroke is only an inch or inch-and-a-half. What is
    the stroke length of the machine shown at SNAG? 

Edward

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________