[Jewelry making - Article 00249] - [Orchid] Tabletop Flat Lap

[John Hollaway]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Hello, This is my first post to this forum, so please let me know if
    my format needs fine tuned. 

    I'm currently researching for the likely purchase of a 6" or 8"
    table-top flat lap.  I've reviewed the offerings from the major
    manufactures, but would like some recommendations from the owners of
    such units.  What say you? Thanks. 

John Hollaway

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________