[Jewelry making - Article 00161] - Re: [Orchid] Making metal end balls

[Wayne M Schenk]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    For earrings I have emulated this appearance by using two pieces of
    threaded wire both of which have beads on them, One beaded wire is
    glued in from each side. Most of the truly fused end wires are
    rather loose so I suspect that the second end is fused some distance
    away from the stone bead. 

WMSchenk  

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________