[Jewelry making - Article 00207] - Re: [Orchid] Reliable platinum caster?

[Stephen Walker]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

>         Does anyone have a long term relationship with a reliable
>     platinum caster that they would recommend? Mid-West location most
>     desirable. 

Hello Steve,

    I have tried about 5 different platinum casters and have settled on
    Platina in NYC. Very reliable and excellent quality. The have their
    own alloy that is a bit harder than regular .950 that also polishes
    with less work. Not in the Mid-West, but with overnight shipping the
    difference in cost is minimal. They have a same day service for a
    premium, but I usually get regular service castings in about a week
    after sending them the mold. 

    http://www.ganoksin.com/resources/detail-platina_casting-2097.html

Stephen Walker

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________