[Jewelry making - Article 00108] - Re: [Orchid] Safe Advice

[Dennis Loss]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Hello I have not been following this thread  from the beginnng so I
    don't know what kind of prices folks have been mentioning. If you are
    doing a fair bit of high end product you really should consider
    getting a real safe. You can get them used from a reliable source.
    What is $ if you can't afford to get robbed and replace a coustomers
    work etc. You can find a TL30 safe used for around $3000. Yes its a
    lot of $ but how much does it cost to replace 1 single 1carat
    diamond?  Do the math.  

    Good luck.  

    ps  TL30 safe wighs about 3000 pounds, you need a good floor. 


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________