[Jewelry making - Article 00050] - Re: [Orchid] Safe Advice

[Jerry]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    There has been some good common sense advise here. Don't let people
    know where you are or live. I have training in lock picking, once
    you know how to, it's can faster than a key. A good safe needs to be
    one that will slow a thief down to a crawl. That is why I go for
    weight. Place I keep no hoisting equipment around in big shop. With a
    steel plate, some bolts and a heavy duty racket set (3/4 inch size)
    I can pop the door off many safes. It just takes a good while to do
    it. The real key is slow the crook down as much as possible, an 800
    pound safe is tough to move quitely. With out a engine hoist it is
    nearly 

    impossible for one or two men to do this. what could be a "golden
    rod",  could be a trip wire for your security system. 

Jerry

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________