[Jewelry making - Article 00044] - Re: [Orchid] Squirt bottles and Pripps

[jkbrennan]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Prips as made is a fully saturated solution..Any evaporation or loss
    of water from the solution will cause solids to drop out and clog
    things up   especially pump systems. There are old fashioned  very
    simple aspirator spray systems which  just consist of a tube at
    right angles to another. Blowing into one with the other in the
    liquid will work in this type situation. There are also some very
    simple spray guns that work this way  The old flit guns  were like
    this.. An air brush that  is "supposed" to work this way  without
    clogging  is an AZTEC . . I can't personally speak to this. maybe
    some one can. 

jesse


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________