[Jewelry making - Article 01174] - Re: [Orchid] Casting Platinum Silver Alloy

[Daniel Ballard]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    I have worked with it a little. All are plenty soft to set or
    engrave. We rolled 4.5mm all the way down to .20 mm with no
    annealing. We could go thinner but the point was made. You should
    contact Chuck at American Bullion to talk to the most knowledgeable
    man on the stuff. I like the 3.5% Pt for the color. 

Daniel Ballard


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________