[Jewelry making - Article 01156] - Re: [Orchid] Laser Welding Titanium

[Jon DiNola]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    As far as I know for-get-about-it, that is sizing titanium, the
    metal can be soldered, we do it almost every day with eye glass
    repairs, but it's not a forgiving metal. It does not want to bend
    easy, our saw blades don't like cutting it, it's noting but a over
    labor job. Find a machinest and have them made/cut to the sizes
    (dimensions) you need. Any good machiest can cut it.

Good luck 


____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________