The Gem and Jewelry World's foremost Resource on The Internet.
Re: [Orchid] Small stones Flush setting  
  [Thread Prev] [Message Prev]      [Date Index]   [Thread Index]      [Message Next] [Thread Next]
From: mhg
Date: Sat May 14 20:23:50 2005
 
     
========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Hey Todd,

    i just got back from the Blaine Lewis advanced setting course,  did
    you go out there?  if you did not sign up today and get out there. i
    have been setting for 18 years, and i have increased my setting speed
    30%, no s..t  it is worth every penny i spent, my two employees are
    going there in july for the setting 1 class.  in repsonse to you
    question.  i had this same problem.  Blaine said when you set small
    stone you need to have the tables flush with the metal, if you do
    this with stones larger than 2.25 mm it will not work.  we were
    taught to use setting burs for this, the stone must be tight, if it
    is loose it will not work.  then he showed us how to make a really
    nice burnishing tool for this.  if you give me you email address i
    will email you a photo of the tool.  then you burnish the metal
    around then stone with the burnisher perpendicular to the stones
    table this is the important part i was originally taught to do this
    on a slight angle. be sure the stone is going in the hole tight
    enough were it takes a brass pusher to work it in. if you cut the
    hole to big blaine showed us a great trick for that to.  use the
    rounded part of your hammer and slighty tap the surface,  this will
    decrease the hole but doesnt mess up the top metal.  again i highly
    recommend his class, i can not wait to go back, he said Kate Wolf
    shows just as many short cuts and tricks in carving as he does in
    setting,  i am hoping to go to her October carving class,  it is very
    hard to get away from my studio. 

talk to you soon 
Matthew
mhgjewelry.com

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________

  Click to Visit  
     
  Navigate:  
   
  Orchid Resources:  
   Join & Post
 Invite a friend to join Orchid
 F.A.Q
 Galleries
 BenchExchange
 Orchid Blogs
 Orchid Message Archives [Subject Index] [Date Index]

Ganoksin now offers a number of ways for you to stay on top of the latest from Orchid!

  1. My Yahoo - Do you have a My Yahoo page? If so, you can easily read the latest Orchid posts on your personalized page by adding this feed:Add Orchid to My Yahoo!
  2. Add Orchid to myGoogle Add to my Google
  3. Read Orchid with NewsGator and Microsoft Outlook Add Orchid to Your  NewsGator
Support Orchid! - If you believe in what we're doing, you can help!

 
     
     

© Copyright 1996 - 2009, The Ganoksin Project