[Jewelry making - Article 00548] - [Orchid] [Source] Half round drawplate

[Bob Place]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Dear Sirs;

    I could sure use a little help from you or your readers. I'm just
    getting started wire wrapping and I am currently working in nickel
    silver. I really don't expect to move into sterling silver or gold
    filled, do to fact I give most of my pieces I give to the people at
    church. 

    Now to my problem I am looking for a "1/2 round drawplate". I have
    been surfing the internet for almost 30 hours. What I found were a
    number of sites that advertised "1/2 round drawplates with a range
    of holes from 3mm to .50mm which is perfect. Except when I call
    these people, I found much to their surprise themselves the range
    was 3mm to 1mm instead which is not small enough. The sizes that are
    typically used in wire wrapping are in that last 1/2mm. or between
    1mm and .50mm. or 20 ga. trough 24 ga. I know someone has to make
    them because there so much sterling silver, gold filled, and karat
    gold wire out there in those sizes. I would like to stay in the $50.
    To $100. price range. 

Robert Place
replace AT ellijay.com

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________