The Gem and Jewelry World's foremost Resource on The Internet.
Re: [Orchid] Most productive way to produce shot  
  [Thread Prev] [Message Prev]      [Date Index]   [Thread Index]      [Message Next] [Thread Next]
From: Beth Rosengard
Date: Thu May 12 20:44:25 2005
 
     
========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Hi Sojourner,

>     Whereas if you have to measure and cut, measure and cut, measure
>     and cut.... makes my hands hurt just to think about it, 

    There's a tool called a tubing cutter jig (e.g., Rio Grande
    #113-839) which can eliminate the measuring part so all you have to
    do is cut -- and that's a lot easier than making rings and sawing (in
    my opinion, of course). 

    To make equal lengths of wire with this jig, just set the stopper
    where you want it and then, instead of using the guide to saw, just
    snip with a wire cutter on the inside edge of the plate (this will
    make sense if you look at the illustration in the catalog ... I hope
    :-).  Now that I think about it, I bet you could improvise a jig for
    this purpose pretty easily. 

>      There's another benefit - you'll always know (after the first
>     set) what size beads you'll get from jump rings made on a mandrel
>     of size X.  And size Y. and size Z. etc. Cuts down a lot on how
>     much measuring you need to do. 

    Same with the jig, once you go through the initial trial and error
    to figure out where to set the stopper for each length of wire that
    you need. 

Beth

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________

  Click to Visit  
     
  Navigate:  
   
  Orchid Resources:  
   Join & Post
 Invite a friend to join Orchid
 F.A.Q
 Galleries
 BenchExchange
 Orchid Message Archives [Subject Index] [Date Index]

Ganoksin now offers a number of ways for you to stay on top of the latest from Orchid!

  1. My Yahoo - Do you have a My Yahoo page? If so, you can easily read the latest Orchid posts on your personalized page by adding this feed:Add Orchid to My Yahoo!
  2. Add Orchid to myGoogle Add to my Google
  3. Read Orchid with NewsGator and Microsoft Outlook Add Orchid to Your  NewsGator
Support Orchid! - If you believe in what we're doing, you can help!

 
     
     

© Copyright 1996 - 2008, The Ganoksin Project