[Jewelry making - Article 00515] - Re: [Orchid] Most productive way to produce shot

[Jerry in Kodiak]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Beth,

    Because the jump rings are going to be as exactly the same size as
    you're are likely to get them unless you use one of those handy dandy
    little gadgets where you feed the wire into a cutter which is preset
    to the proper length and cut them off one at a time. Also, I think
    jump rings are quicker to make. ;-) 

Jerry in Kodiak

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________