[Jewelry making - Article 00306] - Re: [Orchid] Building your own bench

[jake]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Try the Complete Metalsmith by Tim McCreight, available online or at
    your library, at the least if they do not have a copy by loan. Some
    have made do with a used old wooden desk (heavy duty) or look at 

    http://www.ganoksin.com/orchid/BenchExchange 

    for ideas. Most, but by no means all used a conventional bench. More
    than one looks like a converted wood working bench or a composite. If
    it works, that is all that maters, I suppose an ideal layout depends
    on what you are doing, or mostly so. In any event it is worth wile to
    see what others have done in this regards. Moreover if it works no
    argument is legitimate. 

Best regards.

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________