[Jewelry making - Article 00037] - Re: [Orchid] Making my own head pins

[Courtney Graham Hipp]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

>       I don't think you really want to spend forever trying to solder
>     shot onto the ends of wire, (even if you can accomplish this it
>     will take you a great amount of time) nor do you want to put the
>     wire into the tumbler. 

    I just wanted to note that I do think you will still want to tumble
    the headpins if, like me, you have trouble working with dead soft
    wire. 

Courtney
Courtney Graham Hipp
cgHipp Jewelry Designs
http://www.cghipp.com

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________