========[ Invite a Friend - http://www.ganoksin.com/invite.htm ]========
Hello all! I am really hoping someone can help me with two problems
I have been having with my Swest Controller for my Neycraft kiln. The
controller is Model # DTC-617 120v 15amp. The first question is: why
can't I do more than 6 steps in my burnout cycle? I start with the
4step burnout:
9999 degrees to 300 for 1 hour
100 degrees to 350 for 1 hour
350 degrees to 1350 for 2 hours
drop 300 degrees to casting temp.
That's 4 steps, but if I have 5 flasks in the oven with 5 different
casting temps, I am out of steps. Follow me? So far I seem to be
limited to 3 temp changes per casting day.
The next question is a real problem. When the controller gets to the
last step, be it 4 or 6 steps, it suddenly shoots up in temperature,
or sometimes plummets in temperature. I am asking it to hold at say
900degrees for 1 hour and all of the sudden the kiln is at 1100
degrees! I am not sure what to do!
Of course I tried to contact Swest, but they are no longer in
business. Please help!
Mary LInford
Blue Star Wax Carving
mary AT bluestarwaxcarving.com
Would you like to reach Members of the Ganoksin Project to educate
them about the wonderful array of supplies, services and products
you have to offer?
Please request a copy of the Ganoksin Media Kit if you would like
more indepth information regarding Ganoksin's advertising services.
Navigate by Topic:
[
