[Jewelry making - Article 00344] - Re: [Orchid] Bench grinder for polishing tips

[Milt Fischbein - Jewellery Artist]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    I  use a one gallon ice cream container as a hood on my bench
    grinder/polisher. I was able to secure it directly onto the bench
    grinder using the screw holes that the grinding wheel shroud was
    attached to. I cut away about a third of the side of the container to
    get access forpolishing. If I do drop a piece it usually bounces off
    of the plastic container and then falls more gently to the floor. 

Regards
Milt Fischbein
Calgary Alberta

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________