The Gem and Jewelry World's foremost Resource on The Internet.
Re: [Orchid] Oval tube setting  
  [Thread Prev] [Message Prev]      [Date Index]   [Thread Index]      [Message Next] [Thread Next]
From: M'lou Brubaker
Date: Sun Apr 03 21:37:51 2005
 
     
========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    I just did this, in a bead-set diamond ring, where the supposedly
    round diamond was not really round. It is a touchy procedure, so just
    go very slowly and test many times as you enlarge the hole. Hold the
    stone with a sticky tool made of wax or putty stuck to the table as
    you test the fit. The bur used is a regular diamond setting bur, the
    kind with a pointed tip and straight sides. You have to rotate it
    around the inside of the hole, but not let it make the hole deeper. I
    know...easier said than done! Did anyone ever say that diamond
    setting is easy? Just go along slowly and test, test, test. 

    I think that a cylinder bur would be okay, too. It might be nice to
    have a bur that did not have a cutting surface on the bottom. (A bur
    could be customized for this.) Then you could go back in with a
    setting bur at the very end to angle the seat to fit the shape of the
    stone. 

    Another start, if your tube walls are not too thick,  might be to
    stretch the hole by hammering a tapered tool into it, and then
    perfecting it with burs. You could make a tapered oval punch for
    this, sure to come in handy again some time. 

    Most of us who have been working for a few decades have made a lot
    of little tools for ourselves, I'll bet. I sometimes run across one
    in my stuff, and wonder what the heck I made it for! Invent, invent.
    It's part of the fun. 

M'lou Brubaker, Jeweler
Goodland, MN
www.craftswomen.com

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________

  Click to Visit  
     
  Navigate:  
   
  Orchid Resources:  
   Join & Post
 Invite a friend to join Orchid
 F.A.Q
 Galleries
 BenchExchange
 Orchid Message Archives [Subject Index] [Date Index]

Ganoksin now offers a number of ways for you to stay on top of the latest from Orchid!

  1. My Yahoo - Do you have a My Yahoo page? If so, you can easily read the latest Orchid posts on your personalized page by adding this feed:Add Orchid to My Yahoo!
  2. Add Orchid to myGoogle Add to my Google
  3. Read Orchid with NewsGator and Microsoft Outlook Add Orchid to Your  NewsGator
Support Orchid! - If you believe in what we're doing, you can help!

 
     
     

© Copyright 1996 - 2008, The Ganoksin Project