[Jewelry making - Article 00130] - Re: [Orchid] Flawless chains

[Ian W. Wright]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Try Jett Sett on the plier jaws or better still, buy a cheap pair of
    Chinese pliers, file the jaws away a bit and then build them back up
    with Jett Sett (or Polymorph or Plastiform or whatever it is called
    in your locality - and you can sometimes scrounge a few bits from a
    friendly medical surgeon...) Alternatively, get the cheap pliers and
    file the jaws away but then replace them with bits of cut up credit
    card (or store loyalty card,,) stuck in place. 

Best Wishes
Ian
Ian W. Wright
Sheffield  UK

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________