[Jewelry making - Article 00115] - Re: [Orchid] vulcanizing pewter models

[Jwryrubber]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Dear Daniel:

    You can use any of our 4X silicone mold rubbers for pewter. 

    If you wish to do really low temperature mold making, a vulcanizing 
    silicone we introduced in 1994 called LS-250 can be cured at  180F.
    Additionally, we can offer our 2 part clear silicone RTV (liquid), 
    which cures within an hour at 125F. 

    Please call me for a sample. 

Good luck,
 
Bill Mull
Zero-D Products, Inc.
Precision engineered materials solutions
800-382-3271  in USA, Mexico and Canada
440-942-1150  International
www.zerodproducts.com

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________