[Jewelry making - Article 00071] - Re: [Orchid] 3D scanner & stone source

[M'lou Brubaker]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Todd, I recommend that you look into The Joseph P. Stachura Co., Inc.
    They have 3&4mm garnets at 10 and 20 cents each, and some other
    stones from 30 cents to a dollar. Price breaks for lots of 12 and
    144. Sometimes there is one in the 12 that has a scratch on the top,
    but at those prices, it doesn't matter very much. 

    http://www.ganoksin.com/resources/detail-joseph_stachura-1596.html

just a satisfied customer...
M'lou Brubaker, Jeweler
Goodland, MN
www.craftswomen.com

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________