[Jewelry making - Article 01680] - Re: [Orchid] [Source] 32-34g fine silver sheet

[Diane Almeyda]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Hi - Not knowing exactly how large these "cut-outs" are - if they
    are small enough you might be able to special order "very tall"
    cloisonne wire and use that.  I order my wire for plique-a-jour from
    Hagstoz in Philadelphia http://www.hagstoz.com and they have always
    been very accommodating to special size requirements.  They may need
    you to order a "minimum" to make it worthwhile but at least it's a
    way to get very thin "sheet".  Maybe they could roll a certain gauge
    wire to the size you would need - it's worth asking.  Good luck! 
    (No affiliation with Hagstoz - just a satisfied customer.) 

    Diane Echnoz Almeyda 
    http://www.plique-a-jour.com 

    I will be teaching pierced plique-a-jour at Metalwerx April 16-17,
    2005 and filigree plique-a-jour at Metalwerx June 22-26, 2005.  Hope
    to meet some of you there!

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________