The Gem and Jewelry World's foremost Resource on The Internet.
[Orchid] Memco Casting Machines  
  [Thread Prev] [Message Prev]      [Date Index]   [Thread Index]      [Message Next] [Thread Next]
From: D. Bright
Date: Mon Mar 28 15:43:26 2005
 
     
========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    I just recently purchased a Memco Electro Vac Casting machine.  This
    is not the machine that I really wanted but the deal on it was just
    too good to pass up.  The machine that I found had only 26 casts on
    it, and the price was even better.  I bought it to replace a 25 year
    old Galloni when it finally dies or I can no longer get parts.
    (which according to Galloni should be soon) 

    I plan on doing 3 inch flasks with this machine and small casts
    consisting of 1 to 10 pieces per flask.  I realize that most people
    think of this machine as a large object casting machine. 

    Does anyone have any experience with this machine?   Would you mind
    if I called you to ask some questions? 

    I need to know about Memco's suggested casting temps and flask
    temps.  I currently use a low flask temp when I use my Galloni.  I
    cast yellow gold with the flask temp as low as 650 to 750.  If I do
    white gold I cast with the flask temp at about 750-800.  This seems
    to do well for my current setup.  I am using a casting temp for the
    metal of around 950 C.  I am curious as to how this will do with
    vacuum casting.  I am unsure of what effect the vacuum will have on
    cooling the flask and how fast this will occur.  When I use my
    centrifical setup the flask only sits in the machine for less than a
    minute before I cast.  I have been getting excellent results with
    what I have been doing. 

    With the vacuum the flask should only sit for about a minute or
    less...but it will be having air drawn through/around the flask by
    the vacuum pump.  How much do I compensate for this? 

Thank you,
David

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________

  Click to Visit  
     
  Navigate:  
   
  Orchid Resources:  
   Join & Post
 Invite a friend to join Orchid
 F.A.Q
 Galleries
 BenchExchange
 Orchid Blogs
 Orchid Message Archives [Subject Index] [Date Index]

Ganoksin now offers a number of ways for you to stay on top of the latest from Orchid!

  1. My Yahoo - Do you have a My Yahoo page? If so, you can easily read the latest Orchid posts on your personalized page by adding this feed:Add Orchid to My Yahoo!
  2. Add Orchid to myGoogle Add to my Google
  3. Read Orchid with NewsGator and Microsoft Outlook Add Orchid to Your  NewsGator
Support Orchid! - If you believe in what we're doing, you can help!

 
     
     

© Copyright 1996 - 2009, The Ganoksin Project