[Jewelry making - Article 00721] - Re: [Orchid] Announcing 3M New FX Polishing Wheels

[Sam Patania]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    The weather here is so beautifull, it almaost makes me forget about
    my taxes....more...... These green wheels are a completely different
    product than the bristle brushes which I also use on a consistant
    basis. THese are like a hand wrapped emery stick or an expansion
    drum, they have a bit of give to them so they cut the very same way
    a hand emery stick does. They are not hard like the scotch brite
    wheels so they don't leave a pattern if you cross hatch properly,
    again, like I would with a hand emery stick. You will get a bright
    pattern free polish with these wheels. 

Sam Patania, Tucson
www.patanias.com

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________