The Gem and Jewelry World's foremost Resource on The Internet.
Re: [Orchid] Polishing cabs- low tech  
  [Thread Prev] [Message Prev]      [Date Index]   [Thread Index]      [Message Next] [Thread Next]
From: LEESSILVER
Date: Wed Mar 09 19:57:42 2005
 
     
========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Dawn,

    There are several abrasive wheels that can be mounted in your 
    Foredom which can be used to cut and shape stones with the hardness
    of  turquoise. 

    There are aluminum oxide cut-off discs that range in size from  7/8"
    to 1 1/2" in diameter. They can be mounted on a mandrel in your
    foredom handpiece. 

    There are silicone cut-off discs that range in size from 7/8"  to 1" 

    There are diamond sanding discs that mount on the end of a  mandrel.
     These have the advantage in that the mandrel screw does not 
    interfere with sanding.  

    Check out the catalog of jewelry tool suppliers 

    The size of stone you can cut and shape into a cab is limited  in
    the size of disc you use.  You can easily cut and shape stones up to
    an  inch in diameter with the larger cut-off discs.  

    The process is time consuming and creates a lot of dust unless  you
    cut under a water drip system. I made a lot of inlay jewelry using
    cut-off discs and my Foredom until I bought a rock polisher. 

    Contact me off line if I can be of specific help in describing  the
    process.  I could send photos of the process. 

Lee Epperson

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________

  Click to Visit  
     
  Navigate:  
   
  Orchid Resources:  
   Join & Post
 Invite a friend to join Orchid
 F.A.Q
 Galleries
 BenchExchange
 Orchid Message Archives [Subject Index] [Date Index]

Ganoksin now offers a number of ways for you to stay on top of the latest from Orchid!

  1. My Yahoo - Do you have a My Yahoo page? If so, you can easily read the latest Orchid posts on your personalized page by adding this feed:Add Orchid to My Yahoo!
  2. Add Orchid to myGoogle Add to my Google
  3. Read Orchid with NewsGator and Microsoft Outlook Add Orchid to Your  NewsGator
Support Orchid! - If you believe in what we're doing, you can help!

 
     
     

© Copyright 1996 - 2008, The Ganoksin Project