[Jewelry making - Article 00212] - Re: [Orchid] Solder Ghosts

[The Doctor]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

>         As soon as I touch it with any abrasive, it becomes the same
>     color as the silver. Is there a way to tell? 

    Flux, and heat it with your torch. You should be able to see it
    fairly easily. But if your "solder puddle" occurred on a flat
    surface, you should be able to see it from the raised area it
    became. 

>         Also, would some of you share your favorite tools for removing
>     unwanted solder. 

    Bezel scrapers come in handy, sometimes. Riffler files are also very
    useful. Indeed, most files are best for removing unwanted solder.
    Strips or other shapes can be hand-cut into emery or other
    sandpaper. Mizzy wheels, 3M discs, practically every abrasive wheel
    used with the Foredom. String charged with diamond or polishing
    compound can get into very tight spots, too. 

James in SoFl

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________