[Jewelry making - Article 00043] - [Orchid] Roland JWX-10 Jewela CNC Wax Designing Mill

[KARAT46]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    For Orchidians active and passive. 

    I would like to let you know this new mill with Rotary Axis that has
    been out since December can be seen at the MJSA show in New York
    March 6th to the 10th. 

    If you think you might have a problem entering the show e mail your
    details off list. I can see if we can arrange for your entrance as
    we will showing this in Booth 101. 

Regards
Kenneth Singh
karat46 AT aol.com

46 Jewelr Supply, Inc
46 West 46th St,
New York, NY 10036.



____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________