[Jewelry making - Article 00020] - Re: [Orchid] CAD/CAM - 3Design vs ArtCam JewelSmith

[Myron Kliewer]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Taylor,

    Thank you for your comments Taylor.  I can understand your
    suspicions.  Just to put the record straight and keep this thread
    live and running, I would like to be very clear, I am not connected
    in any way with Delcam or 3Design. I have simply watched the CAD/CAM
    market for the last three years and have narrowed my choice down to
    these two companies.  I now have the budget and would like some
    practical advice before making final purchase. 

    I would like to know the pro's and con's of each program?  I'm sure
    there must be many.  I would like to hear what you CAD/CAM users
    have to say, as my experience is only theoretical, based on a few
    demos & the good postings I have read on Orchid. 

    I'd love to hear from more of you. 

Thanks,
Myron

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________