[Jewelry making - Article 00012] - Re: [Orchid] CAD/CAM - 3Design vs ArtCam JewelSmith

[Lee Einer]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

>        Not to be rude but I received an unsolicited email last week
>     asking a similar question (she said she found my email from a post
>     I made to the Orchid list). The sender requested I try 3Design, and
>     reply back to on her how easy it was to use because she wanted to
>     try software that had a fast learning curve. 

    I also received a similar e-mail last week to which I responded in
    some detail. I try to help out when fellow metalsmiths need
    feedback, but if this is some clever "marketing" ploy to lead me to
    their site, well, that is an abuse of my good nature and I have to
    say even if I was interested in  CAD this would be a stand-alone
    reason for me NOT to use this particular product. 

Lee Einer
Dos Manos Jewelry
http://www.dosmanosjewelry.com

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________