[Jewelry making - Article 01338] - Re: [Orchid] Fusing Argentium Silver

[Trevor F]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

>     I really don't know much about fusing. I thought it required
>     special (eg expensive) equipment? 

Hello Zen,

    Me neither but, as usual, you'll find Tim McCreight's "Complete
    Metalsmith" a welcoming introduction to the subject.  On page 111 (of
    the new, Pro edition) he writes: 

          "... fusing can be used to generate interesting forms and
          textures.  Coat pieces of metal with flux and heat them to
          their melting point, taking care to heat all units
          simultaneously.... is the torch is lightly played over the
          surface, it can guide the mirror-like flashes of fusion. 
          Precious metals will respond better to this than copper, brass
          or nickel silver." 

    Hopefully some knowledgeable Orchidian will take the stage and wax
    poetic on the subject. 

Cheers,
Trevor F.
in The City of Light

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________