[Jewelry making - Article 01066] - Re: [Orchid] PMC and Steel

[eluther]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    Hmm I didn't say it was wrong to use a steel brush, just that I
    hadn't heard of it. 

    I don't have the Haab book yet. 

    Art Clay World sells stainless steel brushes   I happened to try the
    steel brushes last week, and found that they give a nice satin
    finish, ever so slightly shinier than the brass brush. 

    The agate burnisher, though, I think, gives a nicer finish than both
    of them. I recommend them to everyone who works with metal clay 

Elaine

Elaine Luther
Metalsmith, Certified PMC Instructor
http://www.CreativeTextureTools.com
Hard to Find Tools for Metal Clay

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________