[Jewelry making - Article 01046] - Re: [Orchid] Rolling mills suggestions

[andy cooperman]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

    I have had 3 rolling mills over the years, all Durston. I started
    with the direct drive mini mill and moved up to the double decker and
    then, finaly, the bigger double decker.  I use my mill constantly and
    consider it, along with my torch and flex shaft indespensible for how
    I work. 

    As I have gone up in mill capability, I have sold the old mills and
    gotten top dollar.  They really hold their value. 

Andy

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________