[Jewelry making - Article 00685] - Re: [Orchid] Grizzly flex shaft

[Dave Arens]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Hi Bekka,

>     Also, does anyone have a source for a cheap or used foot pedal that
>     I can plug a dental flex shaft with a normal 2 prong outlet
>     connection into?

    Not having seen your flexshaft I can't be sure, but many of the
    flexshaft motors can be connected to the foot pedal used by sewing
    machines.  I've successfully connected a Pfingst & a Foredom 'C'
    motor to sewing machine pedals. The pedal is available from most
    sewing machine shops that do repairs.  The pedal comes without wires
    attached to it so you'll either have to use the old wires or supply
    a new set of wires. 

Dave

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________