[Jewelry making - Article 00270] - Re: [Orchid] Techno X handpiece problems

[Beth Rosengard]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Hi Peter,

    Thanks for the great information about the TechnoX in general.  I'm
    archiving your post for such time as I need to deal with worn
    bearings or collets (although I also bought a back up TechnoX before
    the original handpiece went extinct :-). 

>         Opening the collet does not expose the innards to dust. 

    So let me get this one point straight.  You're saying it is
    perfectly okay to change burs while the TechnoX is running? 

Beth

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________