[Jewelry making - Article 00266] - Re: [Orchid] Plating machine fuses blowing daily

[Stephen Walker]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Hello Michael,

    I had exactly the same problem with a new machine, I wonder if it was
    the same one. The supplier was not at all helpful about fixing it,
    but they did suggest that I run the electro-cleaning at a lower
    voltage. Since I have been cleaning at 4 volts it has not blown a
    fuse in 5 years, but I probaly use it only around 10 times a year. 

Stephen Walker

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________