[Jewelry making - Article 00263] - Re: [Orchid] Plating machine fuses blowing daily

[Antonio Cecena]

========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Michael

    Check your leads to make sure there isnt anything that is creating
    resistance , if your leads are old replace them. I had the same
    problem with mine and my plater is 20+ years old. I replaced the
    connection and used a SLO-BLO fuse, but I remember putting foil in
    the fuse to get me through electro stripping. (thats a NO-NO)

Hopes this helps
TC
Cecenas jewelry
in the Midwest

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________