The Gem and Jewelry World's foremost Resource on The Internet.
Re: [Orchid] Soldering on texturized silver  
  [Thread Prev] [Message Prev]      [Date Index]   [Thread Index]      [Message Next] [Thread Next]
From: jonathan presson
Date: Fri Feb 04 08:50:39 2005
 
     
========[ Invite a Friend - http://www.ganoksin.com/invite.htm  ]========

Ok here's my 2 cents....

    Depending on the shape of the area that you are going to solder to
    you have options.... 

    If you are soldering down a round bezel..... You can take a flat end
    piece of round stock steel and use it as a punch to level the area
    where you will make the solder joint.... 

    This will decrease the profile of the solder joint (ideally the
    surface of which will remain flat and you will get a nice surface
    joint due to surface tension and capillary action) there will still
    be voids beneath the surface.... Therefore add more solder than
    needed.. And precise heat control is in order.  I would recommend
    medium solder as if you aren't sure of the contact area and integrity
    of the solder joint.. Then using easy solder is pretty much a
    guarantee of premature joint failure..... 

    If you have an irregular shaped bezel then you can take a flat
    tipped chasing punch to create  a flat surface that is close to the
    shape of the piece to be soldered............ 

    The other option is the brute force option (and is the least as far
    as integrity) which is to flow medium solder into the voids and then
    follow with easy to conceal the vacancies. 

Just my 2 pennies....
Jon P

____________________________________________________________________
T h e   O r c h i d   L i s t
Open Electronic Forum for Jewelry Manufacturing Methods and Procedures
____________________________________________________________________
Orchid FAQ:
~ http://www.ganoksin.com/orchid/faq.htm
Orchid Archives:
~ http://www.ganoksin.com/orchid/archive
Orchid Galleries:
~ http://www.ganoksin.com/orchid/gallery.htm
Invite a Friend:
~ http://www.ganoksin.com/invite.htm
____________________________________________________________________
Tips From The Jeweler's Bench - Article Archive
~ http://www.ganoksin.com/borisat/tip_sear.htm
The Jeweler's Selected Bibliography List
~ http://www.ganoksin.com/jewelry-books
Buy Orchid Jewelry:
~ http://www.ganoksin.com/shop
____________________________________________________________________
-Unsubscribe:
-Email: orchid-request AT ganoksin.com Body=unsubscribe subject=blank
____________________________________________________________________

  Click to Visit  
     
  Navigate:  
   
  Orchid Resources:  
   Join & Post
 Invite a friend to join Orchid
 F.A.Q
 Galleries
 BenchExchange
 Orchid Message Archives [Subject Index] [Date Index]

Ganoksin now offers a number of ways for you to stay on top of the latest from Orchid!

  1. My Yahoo - Do you have a My Yahoo page? If so, you can easily read the latest Orchid posts on your personalized page by adding this feed:Add Orchid to My Yahoo!
  2. Add Orchid to myGoogle Add to my Google
  3. Read Orchid with NewsGator and Microsoft Outlook Add Orchid to Your  NewsGator
Support Orchid! - If you believe in what we're doing, you can help!

 
     
     

© Copyright 1996 - 2007, The Ganoksin Project